Prima Prima Manual de usuario descargar pdf

www.ultramagicard.com

Prima Cleanin

Instructions

Before carrying out cleaning of the Prima printer, a cleaning kit will need to be ordered. This can be ordered

through your dealer network.

A Cleaning Pads for the rubber rollers.

B Cleaning swab for the thermal print head.

C Pack of 10 sticky cleaning cards for the printer rollers.

D Cleaning card with the backing partially removed.

ROLLERS.

• Dirty rollers are the major cause of jamming cards in the printer.

• It is recommended to clean the rollers after printing 1000 cards – dependant upon environment.

• You must also allow the printer to cool before the cleaning cycle.

1. Remove both ribbon cassettes.

2. Switch the printer on, it will initialise however the “No

Cassette” error will show.

3. At this point press the “MENU” button three times to

show the cleaning menu.

4. Press “Enter” to open the cleaning menu. On a

standard printer you will only have the option to clean the

rollers; on a Mag/Chip printer you will have the option to

clean the Magnetic encoding head also.

5. Press “Enter” on the printer menu, this will start the

rollers turning.

NOTE: AT THIS POINT IF THE PRINTER IS

TOO HOT YOU WILL BE

PROMPTED “HR IS TOO HOT”

(HEATED ROLLER IS TOO HOT).

1 2 3 4

www.ultramagicard.com Prima Cleaning Instructions Before carrying out cleaning of the Prima printer, a cleaning kit will need to be ordered. Th

www.ultramagicard.com Prima Cleaning Instructions 6. Remove the backing from the cleaning card. 7. Insert the card from the right hand side

www.ultramagicard.com Prima Cleaning Instructions CLEANING THE THERMAL PRINTHEAD. • When the thermal print head gets dirty, defects such as

www.ultramagicard.com Prima Cleaning Instructions 3. Remove third filter from where the card tray is normally inserted, adjacent to the cleanin

Sin comentarios

Prima Prima Manual de usuario